A single large fixed glass panel for an open, doorless walk-in shower with a calm, spa-like look.
A walk-in shower has no door. A large fixed panel, often called a splash panel, blocks most of the spray while leaving a wide open entry. The look is clean and simple, and it is easy to enter and clean. The design depends on size and layout: the shower should be long and deep enough that water stays in, and the shower head should be positioned away from the opening.
We measure the shower and talk with you about the fixture locations, the floor slope and the width of the entry. Then we choose the panel width, height and glass thickness, and plan wall channels or clamps and a floor channel or a wall-mounted support bar. Glass is made to size, and we set it level and plumb with a small seal where needed.
Wider panels block more water. We size the glass with your shower head position and the room layout in mind.
A panel can be held with wall clamps, a floor channel or a ceiling or wall support bar. We choose the style that fits your tile and your design.
Walk-in showers work best when the head is placed away from the entry. We give honest advice on how much open space your layout can handle.
Few parts and little hardware make the look calm and the cleaning easy.
A wide entry is easy to step through without a door.
One large panel lets the tile and the room shine.
No door, track or frame to wipe around.
We size the panel to your layout and fixtures.
Clamps, channels or support bars hold the glass firmly.
We choose glass thickness for the height and width.
Every topic has its own page with what to expect and how we approach it.
Topic guideShower Door TypesFrameless, semi-frameless, framed, sliding, pivot, bifold and fixed-panel doors compared for look, fit and water control.Learn more 
Topic guideGlass Types and ThicknessAnnealed, tempered, laminated, low-iron, tinted, frosted and insulated glass compared by use, strength and appearance.Learn more 
Top brandCoastal Shower DoorsA maker of frameless and semi-frameless shower doors, enclosures and hardware sold through dealers and online.Learn more Enter the width, height and thickness of a panel to see its area and approximate weight, plus handling and hardware notes.
You tell us what you want or what is wrong with the glass, and we set an estimate visit that fits your day.
We measure the opening, check walls, curbs and floors for plumb and level and note options for glass, hardware and layout.
You get a plain written scope with glass type, thickness, hardware finish and schedule, and you approve it before anything is ordered.
Glass is cut, polished and tempered to your final measurements, and hardware is ordered to match.
We protect your space, set the glass and hardware, seal it and adjust it until it opens, closes and sits square.
We clean up, walk you through the finished work, fix touch-ups and explain how to care for the glass.
It can if the shower is small or the head faces the opening. A well-placed head, a sloped floor and a wide enough panel keep most water inside.
Often about twenty-four to thirty-six inches, or wider for larger showers. We recommend based on your layout.
Three-eighths or half an inch is common, depending on the panel size.
Yes. We can often replace a door with a fixed panel or add a panel to an open shower.
An open entry with no door can be easier to use. We can discuss the layout with you.
Curbless Shower Glass InstallationGlass panels and doors for curbless showers, with floor details planned so water stays in and the look…Explore 
Frameless Shower Enclosure InstallationA door, inline panel and return panel designed together as a complete frameless enclosure that keeps spray inside.Explore 
Custom Glass Shower EnclosuresMade-to-measure glass for unusual sizes, angled walls, steam rooms and designer layouts.Explore 
Frameless Steam Shower EnclosuresFully sealed, ceiling-height glass enclosures with a transom and a door that holds steam in.Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
