Replace foggy, failed double-pane glass units and restore clear views and better comfort.
Double-pane windows are built as sealed units with a gap between two sheets of glass. When the seal fails, moisture gets in and the glass looks foggy or streaked, and the insulating gas can escape. You cannot clean this away, because the moisture is trapped between the panes. Replacing the sealed glass unit restores a clear view and usually brings the window back to its original comfort, without the cost of replacing the whole window.
We measure the sealed unit, check the thickness, the spacer type and any special features such as low-E coatings, argon fill, tempering or decorative grids. We order a new unit to match, remove the old one and install the new unit into your existing frame with new glazing. We test the fit and clean the glass and the frame.
We check the overall thickness, the spacer, the coatings and whether the glass is tempered. A good match helps comfort and appearance.
You can often keep the same specification or upgrade to low-E coatings, gas fill or laminated glass for sound and safety.
The frame must be sound. If a sash is rotted or warped, we tell you before we replace the glass.
The new unit is set with fresh glazing or gaskets so it seals properly and stays dry.
Drag the handle to compare.
BeforeAfterMoisture between panes is gone for good.
Size, thickness and coatings match your window.
Low-E, gas fill and laminated glass are available.
No need for a full window replacement.
Units are set and sealed carefully.
We tell you if the whole window should be replaced.
Every topic has its own page with what to expect and how we approach it.
Topic guideWindow Glass and Unit OptionsSingle pane, double pane, low-E, gas fill, laminated and tempered window glass compared for comfort, safety and clarity.Learn more 
Top brandCardinal Glass IndustriesA Minnesota-based maker of insulating glass and low-E coated glass for residential windows and doors.Learn more Top brandGuardian GlassA large glass manufacturer known for float glass, coated glass and mirrors used in windows, buildings and homes.Learn more Pick a shower door, mirror, railing, window or commercial glass job, set the quantity and add extras to see a ballpark planning range for your project.
You tell us what you want or what is wrong with the glass, and we set an estimate visit that fits your day.
We measure the opening, check walls, curbs and floors for plumb and level and note options for glass, hardware and layout.
You get a plain written scope with glass type, thickness, hardware finish and schedule, and you approve it before anything is ordered.
Glass is cut, polished and tempered to your final measurements, and hardware is ordered to match.
We protect your space, set the glass and hardware, seal it and adjust it until it opens, closes and sits square.
We clean up, walk you through the finished work, fix touch-ups and explain how to care for the glass.
The seal around the double-pane unit has failed and moisture has entered the gap between the panes.
Not from the outside. The moisture is inside the sealed unit, and the unit needs to be replaced.
Units are made to order, often within a week or two. Installation is usually quick.
We match thickness and coatings as closely as we can. Color can vary slightly between makers.
Not unless it is damaged. We inspect it first.
Home Window Glass ReplacementReplace cracked, broken or fogged window glass and keep your existing frames in place.Explore 
Patio and Storm Door Glass ReplacementNew glass for sliding patio doors, storm doors and entry sidelights, with matching hardware checks.Explore 
Tempered and Laminated GlassSafety glass made to size for doors, railings, tabletops, windows and more.Explore 
Glass Tinting and Privacy FilmWindow film for heat, glare, privacy and safety on homes, offices and storefronts.Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
