Frameless vanity mirrors sized to your counter, with clean edges, lighting plans and secure mounting.
The mirror over a vanity is used every morning, and it sets the tone for the room. A wide, frameless mirror that spans the vanity makes a bathroom feel larger and cleaner than a small builder mirror in a frame. It reflects light from sconces and windows, and it can be sized to align with the sinks or run from edge to edge. Because bathrooms are humid, the mounting and the edges need to be done right.
We measure the vanity, the wall and the light fixtures so the mirror clears sconces and switches. Then we decide on height, width and edge style, and we plan where outlets and lights sit. We cut and polish the glass, then mount it with clips or a combination of adhesive and support, so it stays tight in a damp room. Edges are sealed where needed to resist moisture.
A mirror sized to the vanity or wider looks custom. We align edges with sinks, faucets or cabinets as you prefer.
Sconces, light bars and recessed lights influence the mirror size. We plan cutouts or spacing before we cut.
Bathrooms are damp. We use mounting methods and edge sealing that hold up to humidity.
Flat polished edges look modern. Beveled edges look traditional. Shapes such as arches or ovals can be made to order.
A wide mirror makes small bathrooms feel more open.
Lights and outlets are planned into the layout.
Mounting and edges are made for bathrooms.
Flat, beveled or shaped edges to match your design.
Sized to your vanity and fixtures.
Level, square and secure on the wall.
Every topic has its own page with what to expect and how we approach it.
Topic guideMirror Types and MountingClear and tinted mirrors, polished and beveled edges, and clip, adhesive, channel and standoff mounting compared.Learn more 
Topic guideGlass Types and ThicknessAnnealed, tempered, laminated, low-iron, tinted, frosted and insulated glass compared by use, strength and appearance.Learn more 
Top brandCardinal Glass IndustriesA Minnesota-based maker of insulating glass and low-E coated glass for residential windows and doors.Learn more Pick a shower door, mirror, railing, window or commercial glass job, set the quantity and add extras to see a ballpark planning range for your project.
You tell us what you want or what is wrong with the glass, and we set an estimate visit that fits your day.
We measure the opening, check walls, curbs and floors for plumb and level and note options for glass, hardware and layout.
You get a plain written scope with glass type, thickness, hardware finish and schedule, and you approve it before anything is ordered.
Glass is cut, polished and tempered to your final measurements, and hardware is ordered to match.
We protect your space, set the glass and hardware, seal it and adjust it until it opens, closes and sits square.
We clean up, walk you through the finished work, fix touch-ups and explain how to care for the glass.
Often yes. We measure wall to wall and cut to fit with a small reveal.
Yes. We can cut holes or notches for light fixtures, or size the mirror to fit between them.
Moisture can attack mirror edges over time. Sealed edges and good ventilation help prevent it.
Yes. We remove it carefully and repair what we can, then install the new one.
We can install a mirror around an existing light plan. Powered mirrors need an electrician.
Custom MirrorsMirrors cut to your exact size and shape, with polished or beveled edges, for walls, bathrooms, entries and…Explore 
Beveled and Framed MirrorsClassic beveled-edge mirrors and framed mirrors for entries, dining rooms, bedrooms and more.Explore 
Full-Length and Wall MirrorsTall wall mirrors for bedrooms, entries and dressing areas, leaned or securely mounted.Explore 
Frameless Shower Door InstallationThick, clear tempered glass held by slim hinges and clamps for a clean, open bathroom with no metal…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
