Framed to Frameless Shower Door Upgrade in Nashville and Middle Tennessee
Frameless Shower Doors and Enclosures

Framed to Frameless Shower Door Upgrade

Replace a dated framed door with a bright frameless one in a single visit, often without touching your tile.

An old framed sliding door is often the most dated part of a bathroom. Gold or silver aluminum, cloudy plastic or glass, a track that collects soap scum and rollers that no longer glide: replacing it with frameless glass changes the look right away. The upgrade also makes the shower easier to clean, since the frame and track are the places where mildew hides.

We start by removing the old door and track, then inspect the curb, walls and holes left behind. Because the measurements of a frameless door are different from those of a framed door, we take new measurements and may recommend a different layout, such as a fixed panel and a hinged door. After the glass is made, we fit it and fill, seal or cover leftover screw holes where possible.

Removal and inspection

We remove the old door, track and screws and check the curb, walls and tile for chips or movement before planning the new glass.

New measurements

A frameless door follows different clearances than a framed one, so we re-measure and may suggest a layout change.

Dealing with old holes

Anchor holes in tile can be filled or covered. We show you what to expect before we start.

Keeping it simple

Often the new door is installed in a single visit after the glass is ready, with little disruption to the room.

What is included

  • Old door and track removal
  • Curb and wall inspection
  • New measurements
  • Glass fabrication
  • Frameless door installation
  • Cleaning and care tips
Before and after

See the transformation.

Drag the handle to compare.

After: a shower with a crisp frameless door with brushed nickel hingesBefore: a shower with a gold-tone framed sliding door with soap scum and a rusty trackBeforeAfter
A dated framed door replaced by clear frameless glass. From a gold-tone framed sliding door with soap scum and a rusty track to a crisp frameless door with brushed nickel hinges.
Why it works

What you get with Framed to Frameless Shower Door Upgrade

A bright update

Frameless glass lightens a dated bathroom immediately.

Fewer places for grime

No track or frame means less soap scum and mildew.

Clean removal

We remove old frames, tracks and debris.

New clearances

Glass is sized to the opening, not to the old frame.

Possible layout upgrade

A fixed panel or a different swing can improve use.

Hardware match

Choose new finishes to coordinate with the bathroom.

Try it now

Shower Door Style Picker

Answer a few questions about your opening, walls, style and room to see which shower door type usually fits best.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you want or what is wrong with the glass, and we set an estimate visit that fits your day.

  2. 02

    Measure and plan

    We measure the opening, check walls, curbs and floors for plumb and level and note options for glass, hardware and layout.

  3. 03

    Choose and confirm

    You get a plain written scope with glass type, thickness, hardware finish and schedule, and you approve it before anything is ordered.

  4. 04

    Fabricate to size

    Glass is cut, polished and tempered to your final measurements, and hardware is ordered to match.

  5. 05

    Install and adjust

    We protect your space, set the glass and hardware, seal it and adjust it until it opens, closes and sits square.

  6. 06

    Walk through

    We clean up, walk you through the finished work, fix touch-ups and explain how to care for the glass.

Questions

Framed to Frameless Shower Door Upgrade FAQ

Can I reuse the old track?

No. A frameless door uses its own hinges, clamps and seals, and the old track is removed.

Will the tile be damaged?

We remove frames carefully, but old anchors can leave holes or chips. We note them in advance and talk through the repair options.

How long does the swap take?

The old door is removed and the new glass installed in one visit once the glass is ready. Fabrication typically takes one to three weeks.

Can I keep a sliding door?

Yes. Sliding frameless or semi-frameless doors are available if you prefer to avoid swing space.

Will the new door fit my old curb?

We measure the curb and plan the glass and sweep to fit. If the curb is out of level, we explain the options.

Next step

Get your Free Estimate for Framed to Frameless Shower Door Upgrade.

Tell us about your project and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your glass project

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate