New seals, drip rails and bottom sweeps that stop leaks and drips at the edges of your shower door.
The seals and sweeps on a shower door are small, inexpensive parts that do an important job. They close the gaps between glass and wall, between two panels and between the door and the curb. Over time they harden, yellow, tear or collapse, and the shower starts to leak. Replacing them restores the water control the door was built with and often fixes a leak that feels bigger than it is.
We identify the type of seal your door uses: magnetic strips, bulb seals, fin seals, wipers or a drip rail with a sweep. Because profiles differ with glass thickness and door style, we match them carefully. We remove the old seals, clean the edges, fit the new ones and test the door with water to confirm that it closes tight and does not bind.
Seals come in many shapes for different glass thicknesses and designs. Using the wrong shape can leave gaps or make the door hard to close.
A bottom sweep or drip rail directs water back into the shower. Replacing it often solves puddles at the base of the door.
Magnetic seals hold the door shut at the latch edge. Vinyl seals fill the gaps at hinge sides and panel joints. We choose the right type for each location.
Old sealant and soap scum prevent a good seal. We clean glass and metal before fitting the new parts.
Fresh seals close gaps that let water escape.
Profiles are matched to thickness and door style.
Most seal replacements take a short visit.
Old residue is removed before new seals go on.
We check the door with water before we leave.
We explain how long seals last and how to care for them.
Every topic has its own page with what to expect and how we approach it.
Topic guideGlass Problems and CausesWhy shower doors leak, sag and stick, why windows fog, why mirrors blacken and why glass breaks, with…Learn more 
Top brandDAPA Baltimore-founded maker of caulks, sealants and adhesives widely sold at home centers.Learn more Top brandSashcoA Colorado sealant maker known for flexible caulks and sealants for windows, trim and logs.Learn more Pick what you see on a shower door, window, mirror or railing to get likely causes, what to do first and the service page that fits.
You tell us what you want or what is wrong with the glass, and we set an estimate visit that fits your day.
We measure the opening, check walls, curbs and floors for plumb and level and note options for glass, hardware and layout.
You get a plain written scope with glass type, thickness, hardware finish and schedule, and you approve it before anything is ordered.
Glass is cut, polished and tempered to your final measurements, and hardware is ordered to match.
We protect your space, set the glass and hardware, seal it and adjust it until it opens, closes and sits square.
We clean up, walk you through the finished work, fix touch-ups and explain how to care for the glass.
Many last several years, depending on water hardness and use. Replace them when they harden, tear or leave gaps.
A worn or missing sweep is a common cause. A new sweep or drip rail usually fixes it.
They hold the door shut well and are common on frameless doors. We use them where the design allows.
Often yes, but the right profile is important. We can supply and install them for you.
They reduce leaks a lot, but frameless designs have small gaps by design. A fixed panel adds more control.
Shower Door Repair and ReplacementFix a sticking, leaking or sagging shower door, or replace it when repair no longer makes sense.Explore 
Shower Door Adjustment and RealignmentTune up a door that drags, drifts open, leaks or rubs so it closes cleanly and sits square…Explore 
Shower Door Hinges and HardwareReplace worn, loose or outdated hinges, brackets and clamps with sturdy hardware in the finish you like.Explore 
Frameless Shower Door InstallationThick, clear tempered glass held by slim hinges and clamps for a clean, open bathroom with no metal…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
