Tune up a door that drags, drifts open, leaks or rubs so it closes cleanly and sits square again.
Doors drift out of alignment as hardware settles, screws loosen and walls move. A door that rubs the panel, swings open by itself, will not latch or leaks at the edge often needs adjustment rather than replacement. With a few careful changes, the door can sit square again and close with a gentle touch, and a good adjustment can also extend the life of the hardware.
We check how the door sits against the wall, the panel and the curb, and we look at hinges, brackets, rollers and seals. We tighten and adjust hardware in small steps, level the door, set the reveal and gap at the closing edge and adjust the sweep. Then we test the door with water and show you what we changed.
We check the door with a level and adjust hinges or rollers so it hangs square and closes against its seal evenly.
Even gaps around the door look better and leak less. We set the reveal at the closing edge and at the top.
Loose fasteners and over-tightened ones both cause trouble. We tighten to the right firmness and replace worn parts.
We run water along the edges to confirm that the door seals well and the adjustment solved the problem.
A well-adjusted door shuts without rubbing or drifting.
Reveals look neat and control water.
Proper adjustment reduces wear on hinges and rollers.
Many adjustments take under an hour.
Worn screws, gaskets and bumpers are renewed.
We explain what we changed so you can keep it that way.
Every topic has its own page with what to expect and how we approach it.
Topic guideGlass Problems and CausesWhy shower doors leak, sag and stick, why windows fog, why mirrors blacken and why glass breaks, with…Learn more 
Topic guideShower Hardware and FinishesHinges, clamps, handles and finishes compared: polished chrome, brushed nickel, matte black, brass and oil-rubbed bronze.Learn more 
Top brandC.R. LaurenceA long-established supplier of glass hardware, railings and glazing products used by glaziers and fabricators.Learn more Pick what you see on a shower door, window, mirror or railing to get likely causes, what to do first and the service page that fits.
You tell us what you want or what is wrong with the glass, and we set an estimate visit that fits your day.
We measure the opening, check walls, curbs and floors for plumb and level and note options for glass, hardware and layout.
You get a plain written scope with glass type, thickness, hardware finish and schedule, and you approve it before anything is ordered.
Glass is cut, polished and tempered to your final measurements, and hardware is ordered to match.
We protect your space, set the glass and hardware, seal it and adjust it until it opens, closes and sits square.
We clean up, walk you through the finished work, fix touch-ups and explain how to care for the glass.
The door may be out of plumb or the hinges slightly off. Adjusting the hinges or leveling the door usually fixes it.
Yes, if hinges have shifted. We adjust the hinges or the panel so the gap is even.
It lasts a long time when hardware is sound. Worn parts may need replacement.
It often helps a lot, especially combined with new seals and a sweep.
Yes. Frameless doors adjust at the hinges and clamps. Framed doors adjust at the rollers and frame.
Shower Door Hinges and HardwareReplace worn, loose or outdated hinges, brackets and clamps with sturdy hardware in the finish you like.Explore 
Shower Door Seals and SweepsNew seals, drip rails and bottom sweeps that stop leaks and drips at the edges of your shower…Explore 
Shower Door Rollers and TracksNew rollers, tracks and guides so a sliding shower door glides smoothly again.Explore 
Shower Door Repair and ReplacementFix a sticking, leaking or sagging shower door, or replace it when repair no longer makes sense.Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
