Frameless doors and panels for a bathtub and shower combination, with a clean look and easier cleaning than a curtain.
A tub and shower combination is the most common bathroom setup in many homes, and a frameless glass door transforms it. Instead of a curtain that clings and mildews, glass opens up the bathroom and shows the tile. A tub enclosure can use a fixed panel and a swinging door, a sliding door or a fully fixed panel for a simple, modern look.
Tubs sit low, so the geometry matters: the glass must clear the tub edge, work with the wall tile and manage water splashing from a shower head above. We measure the tub, the walls and the ceiling height, then discuss options with you. Glass is cut to fit, set along the tub edge with a sealed channel or clamps, and finished with seals that handle water at a lower height.
The tub rim is not always level. We measure it carefully and design the glass bottom edge and seal so water runs back into the tub.
Options include a hinged door with a fixed panel, a frameless slider or a fully fixed panel. We recommend based on how you bathe and the space around the tub.
Glass lets you step in and out easily, and it avoids the cleaning chores of a curtain and rod.
Tub edges need a robust seal along the bottom and the sides. We fit and test seals so splashes stay inside.
Glass replaces a clinging, mildew-prone curtain with a clean, clear look.
Glass is made to the real tub edge and wall dimensions.
Hinged, sliding or fixed panel designs for a bath and shower.
Seals and panels reduce water on the floor.
Clear glass lets light and views through the bathroom.
Wipe glass and hardware instead of washing a curtain.
Every topic has its own page with what to expect and how we approach it.
Topic guideShower Door TypesFrameless, semi-frameless, framed, sliding, pivot, bifold and fixed-panel doors compared for look, fit and water control.Learn more 
Topic guideGlass Types and ThicknessAnnealed, tempered, laminated, low-iron, tinted, frosted and insulated glass compared by use, strength and appearance.Learn more 
Top brandDelta FaucetA faucet and bath maker that also sells shower doors and enclosures to match its fixtures.Learn more Answer a few questions about your opening, walls, style and room to see which shower door type usually fits best.
You tell us what you want or what is wrong with the glass, and we set an estimate visit that fits your day.
We measure the opening, check walls, curbs and floors for plumb and level and note options for glass, hardware and layout.
You get a plain written scope with glass type, thickness, hardware finish and schedule, and you approve it before anything is ordered.
Glass is cut, polished and tempered to your final measurements, and hardware is ordered to match.
We protect your space, set the glass and hardware, seal it and adjust it until it opens, closes and sits square.
We clean up, walk you through the finished work, fix touch-ups and explain how to care for the glass.
Yes. Many tubs accept a frameless hinged door with a fixed panel, or a fully fixed panel with an open end.
A well-planned door is easy to open and gives enough room for entry. A fixed panel with an open end offers a wide entry.
We measure carefully and set the glass to accommodate the tub edge with a sealed channel or adjusted bottom edge.
Not usually. A properly sized panel and door keep spray inside, though you can add a short curtain if you like.
Yes. We remove the old door and frame and fit new glass to the tub and walls.
Bathtub Sliding Glass Door InstallationClear sliding glass doors that replace a curtain on a bathtub and make the bath brighter and easier…Explore 
Frameless Shower Door InstallationThick, clear tempered glass held by slim hinges and clamps for a clean, open bathroom with no metal…Explore 
Framed to Frameless Shower Door UpgradeReplace a dated framed door with a bright frameless one in a single visit, often without touching your…Explore 
Frameless Shower Enclosure InstallationA door, inline panel and return panel designed together as a complete frameless enclosure that keeps spray inside.Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
