Two glass panels and a door that meet at a clean ninety-degree corner for showers set into a room corner.
A corner shower uses two walls and two glass sides, usually a fixed panel and a door at right angles. Because it is open on two sides, glass geometry matters: panels must meet cleanly, corners must be plumb and the door must clear the fixed panel as it opens. When it is done well, a corner enclosure is one of the most elegant frameless designs, and it makes a small bathroom feel larger.
We measure both glass sides and the corner angle, because many corners are slightly more or less than ninety degrees. Panels are cut to fit that real angle, with a small gap or a clear seal at the joint. We also plan how the door swings, so it does not strike the fixed panel or the vanity. Hardware is set to carry both the panel and the door.
We check the angle between the walls instead of assuming ninety degrees, then cut the glass to fit so the joint looks clean.
Panels meet with clamps, a clear corner seal or a mitered joint depending on style. We explain the look and the cleaning of each option.
The door is planned to open clear of the fixed panel and nearby fixtures, either inward, outward or both ways with pivot hinges.
We check the curb height, slope and drain position so the glass sits level and water runs back into the shower.
Glass panels meet without a bulky frame at the joint.
A corner footprint suits small bathrooms and tight layouts.
Panels follow your real angle, so seams stay neat.
Hardware is chosen to support both the panel and the door.
A fixed panel and a sealed corner reduce water leaving the shower.
Choose hinged, pivot or sliding doors with the same corner design.
Every topic has its own page with what to expect and how we approach it.
Topic guideShower Door TypesFrameless, semi-frameless, framed, sliding, pivot, bifold and fixed-panel doors compared for look, fit and water control.Learn more 
Topic guideGlass Types and ThicknessAnnealed, tempered, laminated, low-iron, tinted, frosted and insulated glass compared by use, strength and appearance.Learn more 
Top brandCoastal Shower DoorsA maker of frameless and semi-frameless shower doors, enclosures and hardware sold through dealers and online.Learn more Answer a few questions about your opening, walls, style and room to see which shower door type usually fits best.
You tell us what you want or what is wrong with the glass, and we set an estimate visit that fits your day.
We measure the opening, check walls, curbs and floors for plumb and level and note options for glass, hardware and layout.
You get a plain written scope with glass type, thickness, hardware finish and schedule, and you approve it before anything is ordered.
Glass is cut, polished and tempered to your final measurements, and hardware is ordered to match.
We protect your space, set the glass and hardware, seal it and adjust it until it opens, closes and sits square.
We clean up, walk you through the finished work, fix touch-ups and explain how to care for the glass.
Yes. Panels and door can be held with clamps and hinges with no frame around the glass, depending on the walls and curb.
We measure the angle and fabricate to it. Small differences are normal and can be handled with careful cutting and sealing.
A pivot hinge allows a door to open in and out. Other designs open in one direction. We help you choose.
Wipe it regularly with a soft cloth and a non-abrasive cleaner, and replace the corner seal if it yellows or peels.
Not always. It depends on the size and height of the panels and the design you prefer.
Frameless Shower Enclosure InstallationA door, inline panel and return panel designed together as a complete frameless enclosure that keeps spray inside.Explore 
Neo-Angle Shower EnclosuresA five-sided glass enclosure with angled panels that fits a corner shower and adds a wide, open entry.Explore 
Pivot Shower Door InstallationA door that swings on top and bottom pivot hinges and can open in both directions for corner…Explore 
Custom Glass Shower EnclosuresMade-to-measure glass for unusual sizes, angled walls, steam rooms and designer layouts.Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
